deanshow
Newbie level 1
recently，when simulating the structure of spiral inductor with NI core，faced the
problem about mesh or port.the error in detail： [error] Port refinement, process abc3d: Port LumpPort1 with terminals will not support terminal mode(s). Most likely causes are: Incorrect boundary setup. Incorrect face/object selected for port. Port object drawn in the incorrect location. Incorrect object material assignment. (12:59 PM 四月 03, 2012)
[error] Simulation completed with execution error on server: Local Machine. (12:59 PM 四月 03, 2012)
problem about mesh or port.the error in detail： [error] Port refinement, process abc3d: Port LumpPort1 with terminals will not support terminal mode(s). Most likely causes are: Incorrect boundary setup. Incorrect face/object selected for port. Port object drawn in the incorrect location. Incorrect object material assignment. (12:59 PM 四月 03, 2012)
[error] Simulation completed with execution error on server: Local Machine. (12:59 PM 四月 03, 2012)