Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Ericsson A1018s - info on protocols needed

Status
Not open for further replies.

jpies

Junior Member level 2
Joined
Feb 27, 2002
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
67
Ericsson A1018s

:?: Who knows the protocol the mobiles Ericsson A1018s in mode "at*binary"?
Where information can be obtained?

Thanks
 

hi,
somewhere (it was more than year ago)
i got this
*************
power up the phone with +5V applied to test input
phone will respond with "U" at 9600 bps
send "0B" within 1 second (else phone turns on)
phone will respond with "R"
send two bytes 00 03
phone will respond with two bytes 00 02
send 64 bytes 00
phone will respond with three bytes
send another 64 bytes 00
phone will send "S" after about half a second
send the binary file to the phone
*************
here is also a binary uploader with src from that site (i've lost the link :-(
i never use them....
hope this helps
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top