Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ERC rule check / ERC errors

Status
Not open for further replies.
M

mj08

Newbie level 2
Newbie level 2
Joined
Jul 2, 2013
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
13
HI,
is there anyone who is familiar with atopTech tool?? I am looking at ERC errors and i get this error
nwell with pdevice not connected to power
i am not sure how to fix this error.
ay suggestions would be helpful
 

Hi mj08,
I'm not familiar with atopTech.
But , I think the issue could be that the nwell is not biased to VDD (if so u must add an VIA to connect the nwell to VDD )
or it could be that you haven't specified the power pins .
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top