I've found, it's a timing issue.
When I compile my prog for 8MHz (HS Mode) and run the simulation at 8MHz, it's ok.
My original config, PLLx4 Mode and a Fosc=40 MHz, doesn't work.
Seems the ENC28J60 model from Proteus doesn't want the 10MHz SPI, like the old revison of this ic.
I've found, it's a timing issue.
When I compile my prog for 8MHz (HS Mode) and run the simulation at 8MHz, it's ok.
My original config, PLLx4 Mode and a Fosc=40 MHz, doesn't work.
Seems the ENC28J60 model from Proteus doesn't want the 10MHz SPI, like the old revison of this ic.
Hi, im also trying out something on ethernet, please can you send your code and circuit diagram, it would realy be helpful to me. my mail is oluwoleoyetoke@yahoo.com