arwen16
Junior Member level 3
Hello,
I am simulating an overall 60mm long structure consisting of two non-uniform SIW structure of 25mm each with a gap between them, from DC to 10 GHz (Npts=50). I used 6 GHz as the mesh frequency and 80 cells/wavelength. The EM simulation of the structure took more than a day. Initially, I did the EM simulation of each structure individually, each taking about 10 hrs. The results were not accurate as the gap was not considered. So, I decided to simulate the overall structure with the gap but the simulation is taking more than a day.
Could someone please tell me where am I going wrong? I wish to reduce the simulation time considerably.
I am simulating an overall 60mm long structure consisting of two non-uniform SIW structure of 25mm each with a gap between them, from DC to 10 GHz (Npts=50). I used 6 GHz as the mesh frequency and 80 cells/wavelength. The EM simulation of the structure took more than a day. Initially, I did the EM simulation of each structure individually, each taking about 10 hrs. The results were not accurate as the gap was not considered. So, I decided to simulate the overall structure with the gap but the simulation is taking more than a day.
Could someone please tell me where am I going wrong? I wish to reduce the simulation time considerably.