Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

effective permittivity

Status
Not open for further replies.
S

sahar20

Member level 1
Joined
Apr 28, 2007
Messages
40
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,525
how to find effective permittivity (Eeff.) as a function of frequency in IE3D?
 

Please simulate a 2-port short uniform TLN. MODUA will be displaying the s-parameters after simulation. Please select PROCESS->FIND TRANSMISSION LINE PARAMETERS and provide the physical length. Then, you will have a table of the Ereff vs. Frequency.
 

    S

    sahar20

    Points: 2
    Helpful Answer Positive Rating
hi
can tou tell the effective permittivity formule in terms of absolute permittivity
thank you
 

The formula depends on the type of transmission line(microstrip, stripline, waveguide etc) but there is a condition

The condition is 1<Ereff<Er

Regards,
Akrcal
 

The popular formula for effective permittivity calculation only takes the two-layer dielectric into account. You can find it in the transmission part of one microwave or microstrip patch antenna part of one antenna book. It's really complicated to calculate the effective permittivity of multi-layer dielectric.
 

hi

akrcal wrote:
The condition is 1<Ereff<Er
Click to expand...
thank you but equation if you found at any time plzzzzzzzz post here
thank you[/quote]
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top