Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Dual tracking power supply schematics

Status
Not open for further replies.
Hi, you can find a similar power supply int this site:

https://www.electronics-lab.com/projects/power/003/index.html

All you have to do is, make two of the power supply presented in this site and will get a dual power supply, wich is what you want, right?
I'm beginning to build this PS myself. It is very reliable, low ripple, etc.

Hope it helps.

I have more links to other PS schematics you you need, just ask, ok?
I've choosen this one because it is the best, and the more complete project I've found.

Best regards, Helder Silva
 

hi jackrs
try this commercial circuit diagram for what u ask for
cheers
 

hi jackrs
this is adual unregulated power supply

it is so easy


And you can use 78H24 to make +B regulated
 

hi again
this is a very great project for an excellent power supply by : Tony van Roon
u can have a controle over 0~10A current and 0~35V voltage with complete short protection .
give it a try
cheers
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top