Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

DTMF decoder MT8870 for mobile phone

Status
Not open for further replies.

sakaz

Junior Member level 1
Joined
May 23, 2007
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,468
Dear forum,

Hope you are doing well.

I have been working with the DTMF decoder MT8870 for few months but i could not get success. I have used few circuits mentioned in the datasheet. But i am facing problem *, 0, # , 7, 8 ,9 buttons are working but sometime works the 1, 2, 3, 4, 5, 6.

Why is that???

I have connected to MT8870 Pin 2, 3 ....> 100 Kohm

But one thing i need to ask i have took dtmf toon from the mobile phone T68 speaker and connected to the MT8870 using a 5Kohm Variable resistance to control gain.

What is the working cirucit for the mobile phone.

Waiting for your supportive response.

Regards
Shan
 

sreein

Junior Member level 1
Joined
Oct 11, 2010
Messages
15
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
india
Activity points
1,394
Re: DTMF MT8870 Decoding

try it.....
To get good result use nokia 6600 with docomo/bsnl(in India)sim in decoder side.
by Ur,
sree

---------- Post added at 09:51 ---------- Previous post was at 09:46 ----------

try another one

---------- Post added at 10:00 ---------- Previous post was at 09:51 ----------

try it.......
Circuit diagram shown in http://images.elektroda.net/55_1286856678.jpg

please try 8.2k and 82k in the place of 8.2k resistor(marked in the image).To get good result use nokia 6600 with docomo/bsnl(in India)sim in decoder side. it worked with me
by Ur,
Sree
 

murodin

Newbie level 2
Joined
Oct 11, 2010
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,290
Re: DTMF MT8870 Decoding

i made such a this circuit that you made. ihad some problems like you. And i took off the microphone of mobile phone. because the the signals that came from the microphone and keyboard of the mobile phone could mix. so it causes stability problems in your circuits. Try it and send me result. have a good works
 

welove8051

Full Member level 6
Joined
Jul 16, 2009
Messages
357
Helped
51
Reputation
102
Reaction score
41
Trophy points
1,308
Location
india
Activity points
3,277
Re: dtmf mt8870

check this site a for a project called dtmf device control using micro controllerFREE PROJECTS ON HARDWARE(8051) AND SOFTWARE(VB, C,C++,JAVA...).

make sure u using original dtmf decoder ic. cheap ic's doesnt respond well for some buttons. nokia phone works well. i didnt get satisfied results in samsung phones and one with usb connectors
 

mahepesar

Newbie level 1
Joined
May 17, 2012
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,285
Hi! I've built a poroject with the mt8870 and I've connected the Q1-Q4 outputs to LEDs so that I can see the codes, but when I call too the phone line by my Nokia 5800 and it would got busy, but the dtmf decoder doesn't seems to work :) any idea?:)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top