Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

dsPIC 30F2012 programmer

Status
Not open for further replies.
narccizzo

narccizzo

Full Member level 3
Joined
Jan 20, 2006
Messages
173
Helped
16
Reputation
32
Reaction score
11
Trophy points
1,298
Location
PATZCUARO,MICHOACAN,MEXICO
Activity points
2,819
30f2012

DOES ANYBODY HAS A SCHEMATIC FOR DSPIC PROGRAMMER??...............THANKS

Added after 30 minutes:

I already found one "GTP-USB+", but it needs a firmware, does any knows this programmer?
 

dspic30* with jdm programmer

The ICD2 supports dsPICs check the microchip web to see if your device can be programmed.
Then you could build a ICD2 clone. Just search this forum there are several circuits.
 

    narccizzo

    narccizzo

    Points: 2
    Helpful Answer Positive Rating
dspic programmer

a simple jdm programmer with icsp cable and the free software winpic800 should work
I didnt test it yet but the requirements of these make this **should** work...
 

    narccizzo

    narccizzo

    Points: 2
    Helpful Answer Positive Rating
Tested witch jdm programmer winpic800 and dsPIC30f5011 not working :-(
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top