Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

doubts regarding MRF24J40MA module

Status
Not open for further replies.
A

arbj

Full Member level 4
Joined
Oct 5, 2008
Messages
238
Helped
31
Reputation
62
Reaction score
20
Trophy points
1,298
Activity points
2,599
Hi,

I need some clarification here regarding the use of the MRF24J40MA wireless module.

1. When the value of RXMCR is changed during initialisation, packets cannot be transmitted. Also the value of RXMCR when read is incorrect. Why is this ??, should RXMCR be changed ? or left to its default value ??

2. I have not setup interrupts, will polling for RXIF bit in ISRTS register be set to 1 ??

3. The RXIF bit is set whenever I transmit a packet, is it OK for the module to receive its own packet ??, is this normal operation ??

I use the ZENA network analyser to check if packets are transmitted, the transmission works OK, but when RXMCR is changed during setup it does not.

thanks
a
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top