Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

doubt with a simple CST rectangular waveguide simulation

Status
Not open for further replies.
C

curiouscase

Junior Member level 1
Junior Member level 1
Joined
Jan 16, 2015
Messages
15
Helped
4
Reputation
8
Reaction score
4
Trophy points
3
Visit site
Activity points
83
I have doubt with a simple CST rectangular waveguide simulation regarding S parameters. I am not able to figure out the return loss esp. higher cutoff frequency of waveguide. Because, with simple back to back test, it looks always less than -60 dB above the defined frequency range.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top