panthagada.praveen
Newbie level 1
1.why status s7 is always 1, what happens if it is left no connection or always 0
2. why status s6 is always 0, i got ans that it indicate that 8086 is controlling the bus and tri-state during hold ack ........as s6 is active high signal it should be logic 1 rather than 0 ,
can any one explain that..
2. why status s6 is always 0, i got ans that it indicate that 8086 is controlling the bus and tri-state during hold ack ........as s6 is active high signal it should be logic 1 rather than 0 ,
can any one explain that..
