Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
hi,
Ng-spice rework-14 has bsim3/bsim4 deivce models, and has temperature and
resistance sweeps (something similar to parametric analysis).
This is the superiority of rework-14 over spice3 (although bsim3/bsim4 can be built
into spice3f4 from the code available from ucb site)
Ng-Spice **intends** to be similar to commercial grade simulators:
With good gui,
Better convergence algorithms (convergence with accuracy is a bitch in spice3)
Different analysis types (like monte-carlo, parametric etc)
and other features.
Ng-Spice *is* similar to spice3:
Is derived from generic spice3 (the code is completly rewritten in ng-spice).
Uses the same newton-raphson method for linearization.
Same user interface.
The current release is dated 10-December-2001 and still very much in
the development stage,IMO for all the intentions to become reality,
it could take some time.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
