Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] does LFSR based BIST detects stuck at faults at fanouts

Status
Not open for further replies.

avinashch

Member level 2
Joined
Oct 1, 2010
Messages
42
Helped
5
Reputation
10
Reaction score
5
Trophy points
1,288
Location
california, usa
Activity points
1,508
i know how LFSR based built in self test (BIST) works and how to detect faults but i am confused whether it will detect stuck at fault at a fanout point as the response analyzer compares two signature from the output of the circuit under test. we can identify the faults at primary inputs but how to figure the fault at a fanout point?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top