Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Do these Bode plots of a flyback SMPS look right?

Status
Not open for further replies.
T

treez

Guest
Here are the gain and phase plots of a flyback SMPS.
Do they look allright?
The actual flyback runs off rectified mains which fluctuated between 150V and 330V at 100Hz.
I had to pick a single Vin for the bode plots, so I picked 150V.

Schem, LTspice sim and bode plots attached

vout = 30v, pout = 22.5w, fsw=97khz, cout = 470uF, current mode, CCM, continuos mode,
 

Attachments

  • Stability Bode plots _Flyback CCM.jpg
    Stability Bode plots _Flyback CCM.jpg
    264 KB · Views: 140
  • Flyback _TL431_FLSL_type2.pdf
    18.9 KB · Views: 86
  • Flyback _TL431_FLSL_type2.txt
    9 KB · Views: 64

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top