Hyperterminal controlled character generator on VGA monitor
Here's a simple very basic VGA text display that I created for the Xilinx/Digilent Spartan-3 Starter Kit. It uses a PS/2 keyboard input module that I found on OpenCores. Maybe you could replace the PS/2 module with an RS-232 UART module.
#854008
No C code needed. Maybe I misunderstood your project description?
My small example design (written in Verilog) runs in the FPGA on the Spartan-3 board. You plug a keyboard and VGA monitor into the board. The FPGA receives keypresses from the keyboard, and displays the characters on the monitor.
Cause one monitor is to open the hyperterminal and another is to display the keyboard character. The monitor that use to display the character is connected to the vga port of the spartan-3 board.
Im using C code for this project because im using MicroBlaze.