Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

dipole antenna design in freq range of 0.7-3ghz

Status
Not open for further replies.

rajkumar3886

Newbie level 5
Joined
Mar 1, 2011
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,330
I started desining with dipole antenna in freq range of 0.7-3ghz ..I need suggestions and papers for desired freq range..plz help me out..!!!!
 

It depends on your specifications but most practical way is to design it at 1.85 GHz as lambda/4. For larger bandwidth you may design log periodic dipole.
 

Im using ads software and the substrate is RO4360...
 

I suggest you to use CST or HFSS for antenna design
 

ADS is ok but the adjustments with radiation patterns, gain analysis in not advised on ADS.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top