Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Digital Storage Oscilloscope-- Signal Conditioning.

Status
Not open for further replies.

cmos babe

Full Member level 4
Joined
Jan 15, 2005
Messages
209
Helped
11
Reputation
22
Reaction score
0
Trophy points
1,296
Location
Dubai
Activity points
1,897
Hey there. What kind of signal conditioning is required for a DSO ? And what determines (limits) the DSO's bandwidth ?
 

I just made a post here about DSOs. Have you looked at the Bitscope site. It is an open source MSO, and they have laid out the methods of development on the site:
https://www.bitscope.com/
I think this will answer your questions.
Regards,
Robert

Added after 1 minutes:

Here is that other thread. The OP also gives a link to some good info.
regards
 

    cmos babe

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top