Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Digital design for a Quadcopter

Status
Not open for further replies.

bassemaed

Newbie level 2
Newbie level 2
Joined
May 19, 2013
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,296
hey guys :)
I want your help in my project
I am asked to create a Quadcopter using logic circuits only
is this possible?
What are the difficulties that i will face
I cannot use neither microcontroller nor microprocessor
so is there any alternative way?
Thanks a lot for your help :) :)
 

Perhaps you can make it with comparators, transistors, multiplexers and relays...etc. However, it should not be too complex to work 4 props seperately.
Or you can control it via an Android application, which does not include any microcontroller.

By the way, nothing is impossible. (You could just make a room size helicopter :) )
 

I guess that you can make a quadcopter without a microprocessor but this will surely rule out the stabilization. Which is done by reading the gyros and accelerometers, and remote control signals and implementing a feedback loop to control the speed of the motors.
In that case it would be very difficult (if not impossible) to fly.
Implementing a feedback control loop without a uC would be easier using analog circuits than only logic.
Probably you will face similar difficulties if you try to build a led TV using vacuum tubes.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top