Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Digital & Analog Ground pin in ADC

Status
Not open for further replies.
J

jitendrabatham

Junior Member level 2
Junior Member level 2
Joined
Sep 29, 2007
Messages
22
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Pune
Activity points
1,413
Hi All,

Can any one tell me the how to interface Digital & analog Ground pin in ADC TLC 0832 with the 8051 microcontroller.
 

There is only one gnd pin on the TLC0832, is it the TI ADC you're talking about?
 

jitendrabatham,
The best technique is to keep analog and digital grounts completely separate except for one common point. This common point should be the power source. This way, you prevent ground current from the digital circuits from flowing in the ground path for the analog section.
Regards,
Kral
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top