digilent Basys spartan xc3s250e TQG144 UCF doesn't work

[schoku]

hello
i have same problem with configure my ucf file to work with digilent basys board

i just get the ucf file from digilent website :
Digilent Inc. - Digital Design Engineer's Source

but it doesn't work, i will be greatfull for any help
It looks like it is not the ufc for this board, but digilent say that it is..

i got warnings like this:

WARNING:MapLib:680 - LOC constraint P20 on led7_seg_o<3> is invalid: No such
   site on the device. Ignoring...
WARNING:MapLib:680 - LOC constraint P21 on led7_seg_o<4> is invalid: No such
   site on the device. Ignoring...
WARNING:MapLib:680 - LOC constraint P29 on sw_i<2> is invalid: No such site on
   the device. Ignoring...
WARNING:MapLib:680 - LOC constraint P6 on sw_i<7> is invalid: No such site on
   the device. Ignoring...
WARNING:Place:837 - Partially locked IO Bus is found. 
WARNING:Place:1019 - A clock IOB / clock....

it's just a few ones pins which doesn't work.. but it makes my all app broken.

any suggestion?

PS:
sorry for my english,

 

[permute]

"No such site on the device."
Make sure you have selected the correct device in ISE's "project settings". Also, make sure you have the correct UCF. The UCF is calling out pin locations that do not exist on the part you have told ISE to build for.

 

[schoku]

i am sure the project settings is ok, i can make a print-screen if you do not believe .

 

[mrflibble]

Well, the warnings mean precisely what permute says they do... What is the exact part that you have configured in project navigator?

 

[schoku]

hello, i have just reinstalled everything xilinx, adept and now it works, thanks for help.