schoku
Newbie level 3
hello
i have same problem with configure my ucf file to work with digilent basys board
i just get the ucf file from digilent website :
Digilent Inc. - Digital Design Engineer's Source
but it doesn't work, i will be greatfull for any help
It looks like it is not the ufc for this board, but digilent say that it is..
i got warnings like this:
it's just a few ones pins which doesn't work.. but it makes my all app broken.
any suggestion?
PS:
sorry for my english,
i have same problem with configure my ucf file to work with digilent basys board
i just get the ucf file from digilent website :
Digilent Inc. - Digital Design Engineer's Source
but it doesn't work, i will be greatfull for any help
It looks like it is not the ufc for this board, but digilent say that it is..
i got warnings like this:
Code:
WARNING:MapLib:680 - LOC constraint P20 on led7_seg_o<3> is invalid: No such
site on the device. Ignoring...
WARNING:MapLib:680 - LOC constraint P21 on led7_seg_o<4> is invalid: No such
site on the device. Ignoring...
WARNING:MapLib:680 - LOC constraint P29 on sw_i<2> is invalid: No such site on
the device. Ignoring...
WARNING:MapLib:680 - LOC constraint P6 on sw_i<7> is invalid: No such site on
the device. Ignoring...
WARNING:Place:837 - Partially locked IO Bus is found.
WARNING:Place:1019 - A clock IOB / clock....
it's just a few ones pins which doesn't work.. but it makes my all app broken.
any suggestion?
PS:
sorry for my english,