Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

DFR200 Compaq-Identix Fingerprint Sensor SDK Manual Needed

Status
Not open for further replies.

real_tr

Member level 3
Joined
Mar 22, 2002
Messages
63
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Turkiye
Activity points
433
sensor identix dfr 200

Hi to all,
I buy a fingerprint sensor name compaq fingerprint scanner and comes with identix biologon software
but i want to use this scanner with my program
how can i do that,
I need an SDK developers manual for this purpose
Anyone have??
i download an SDK program from identix web site -> checkdfr.exe
it uses 3 dll files
dfrdrv.dll -> DFR200 interface library
itio32.dll -> Image input/output library
itf32.dll -> Framegrabber interface library

how can i use these dlls if cannot find any sdk manual
(i know delphi, c and c++ langıages)
Please Help...
 

biologon download sdk

Hi - remember the parallel-port type of web-cameras? The DFR-200 uses the same chip as many of those old "quick-cams". When I get back to work Monday I'll tell you the exact chip and where to get the datasheet.
:wink:
 

identix c libraries and dlls

any other???
 

dfr-200 sdk

The Identix DFR-200 uses the ST Microelectronics "VV5404" monochrome camara chip. If you can get the datasheet from ST, it will tell you how to control the interface and timing.

The DFR-200 has a 10-pin in-line connector on the module. It has the following signals:

1 = SCL (I2C control interface CLK signal)
2 = SDA (I2C control interface DATA signal)
3 = DC3 (camera data MSB)
4 = DC2 (camera date)
5 = DC1 (camera data)
6 = DC0 (camera data LSB)
7 = CLC (camara data clock)
8 = +5V (90mA max)
9 = GND
10 = Shield-GND (connected to GND on module PCB)

Enjoy!
 

identix sdk

thanx
any other???
any reference or smt. help
 

How much it cost ?

How much it cost ?
 

Re: DFR200 Compaq-Identix Fingerprint Sensor SDK Manual Need

Anybody has more information about the sdk for the dfr-200 fingerprint scanner. Library details for the dlls that come with the device, sdk, etc.

Or may be a library or ocx control that can use the device?

Thanks very much.


Eli
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top