Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Device_type property in Cadence Allegro

Anonymous_Ricky

Advanced Member level 2
Joined
Dec 26, 2006
Messages
515
Helped
88
Reputation
178
Reaction score
58
Trophy points
1,308
Location
India
Activity points
3,962
I was going through the compoenent properties in Allegro where I noticed that in device type same components has two differnet device type values though part has source package , pcb footprint and value as same.


Case 1

CAPACITOR_CAPC1005_0H60N_100PF_
CAPACITOR_CAPC1005_0H60N_100PF

Case 2

CAPACITOR_CAPC3225_1H40N_10UF__
CAPACITOR_CAPC3216_1H40N_10UF

I think that comp_device_type="source package"_"pcb footprint"_"value"
then why extra "_" is added in the end of device type property as in case1 and case2

I am unable to understand the reason for this, please help me to understand how the dvice type property is defined in Cadence

Thanks & Regards
Ricky
 

Toggle Sidebar

Welcome to EDABoard.com

Sponsor

Sponsor

Design Fast


X
Top