Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

designing of band pass filter

Status
Not open for further replies.

sreechoudhary

Junior Member level 3
Joined
Dec 2, 2004
Messages
30
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,286
Activity points
235
hai every body

i designed bandpassfiletr with central frequency 120MHz and band width 5MHz .i got circuit simulations .i finished board. i am getting signals nearly at 400MHz how to supress that one.

thanking you inadvance
 

Vamsi Mocherla

Advanced Member level 1
Joined
Sep 6, 2004
Messages
469
Helped
72
Reputation
144
Reaction score
11
Trophy points
1,298
Activity points
5,136
May be you can put a simple RC network after the Bandpass filter with a cut off frequency of about 125 -130 MHz. It will not help very much,but it can reduce the spur at 400 MHz.Can you send in the architecture of the filter so that we can look at any tweaks.......
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top