Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Designing a DSP project using blocks in Matlabs DSP toolbox

Status
Not open for further replies.
S

seyyah

Advanced Member level 2
Joined
Oct 7, 2001
Messages
646
Helped
8
Reputation
16
Reaction score
8
Trophy points
1,298
Activity points
6,233
Matlab and TI

I think there is a toolbox for DSP in matlab. Can we design a dsp project only using blocks in this toolbox. Can matlab produce source codes from these blocks? Are they reliable and flexible?
 

Re: Matlab and TI

You'll need more than the DSP toolbox. You will also need the real time toolbox (or workshop?) which lets you generate code for a few TI DSP's(and also power PC's) and simulink.

The source code produced is very reliable and also fairly easy to read.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top