Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Designing A BJT Voltage Controlled Oscillator (example)

Status
Not open for further replies.

myicejade

Member level 2
Joined
Jun 18, 2004
Messages
48
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
391
clapp-gouriet

Designing A BJT Voltage Controlled Oscillator
Objectives:
· A simple voltage controlled oscillator is designed using the Clapp-Gouriet
configuration.
· The oscillator is tuned by a varicap connected to a d.c. tuning voltage.
· This is a low power oscillator, operating at 400-450MHz at a supply voltage of 2.7V to 3.3V.

/Deleted. It is available at the link below. (klug)/
 

Re: a VCO design example

This file can be found here:

**broken link removed**

Don't upload public files from the Internet. Just post the link.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top