Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Design filter supressing harmonica

Status
Not open for further replies.
S

STD

Member level 4
Joined
Dec 10, 2003
Messages
76
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
649
Hi guys,
Pls tell me some theory and tricks on designing waveguide filter with capability of supressing harmonic.For example,8-10GHz BPF,with 40dBc attenuation among 16-20G.

I cannot carry on with my work now.
Response is appreciated!
 

You need to use a corrugated waveguide filter or a waffle-iron filter.
Theory and example you can find in the "Matthaei book" and the attachments file's from R_Goulouev.
Good luck.
 

Hi borich_03,

I have downloaded both the files but the files are in extension *.mcd ; could I know what software will be able to open the above attachement?

Thanks.
 

yuppi77 said:
I have downloaded both the files but the files are in extension *.mcd ; could I know what software will be able to open the above attachement?

Thanks.
Click to expand...

You've to use MathCad programme from Mathsoft Corporation.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top