Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

delta-sigma toolbox simulation problem

Status
Not open for further replies.

ballance

Newbie level 5
Joined
Jan 11, 2006
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,331
hello everyone

i don't know what are the f(sample) and f(signal) of below program.
please help me !!
thanks

------------------------------------------------------
osr=64;
h=synthesizeNTF(5,osr,1);
nlev=3;
nfft=2^13;
tone_bin=57;
t=[0:nfft-1];
u=0.5*(nlev-1)*sin(2*pi*tone_bin/nfft*t);
v=simulateDSM(u,h,nlev);
n=1:150;
stairs(t(n),u(n),'g');
hold on;
stairs(t(n),v(n),'b');
------------------------------------------------------
 

currentmirror2000

Member level 4
Joined
Dec 21, 2004
Messages
77
Helped
6
Reputation
16
Reaction score
1
Trophy points
1,288
Activity points
798
hi, plz see below:

sampling frequency fs = 1

osr=64; ==> BW = 1/2/64 = 7.8125*10^-3 (normalized to fs);

nfft=2^13;
tone_bin=57;
u=0.5*(nlev-1)*sin(2*pi*tone_bin/nfft*t);
==> input frequency fin = 57/2^13 = 6.958*10^-3 (normalized to fs);
==> fin = 0.89BW

in summary, this is to simulate with osr = 64, sampling frequency = 1, input signal bandwidth = 7.8125*10^-3 and input test frequency = 0.89*BW

hope it helps

best regards,
c.m.
 
  • Like
Reactions: safa.

    ballance

    Points: 2
    Helpful Answer Positive Rating

    safa.

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top