Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

define a TH pin with poligon

Status
Not open for further replies.
Y

yair fisher

Newbie level 4
Joined
Sep 19, 2012
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,314
hello
i need to define a component in P-cad with thru-hole pin when the pad in the bottom layer is a poligon and not just a circle.
how can i do it ?
Thank Yair
 

Status
Not open for further replies.

Similar threads

aNdreiBuuu
Can I define a padstack (pin) with multiple holes inside?
Replies
3
Views
2K
pvskt
P
C
How define rule for specific PIN (PAD) in Altium Designer?
Replies
1
Views
2K
SHABU
S
S
[SOLVED] CADSTAR. Define a via with no annular ring?
Replies
3
Views
2K
marce
M
S
A pin with the number "xxx" exists twice in "
Replies
0
Views
4K
student11
S
S
part number required for TH SIP (0.15"=3.81mm pin to pin spacing) resistor 1/2watt
Replies
1
Views
1K
allenf
A

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top