Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

DAC with SPI recommendation

Status
Not open for further replies.
S

stube40

Member level 3
Joined
Feb 10, 2010
Messages
55
Helped
4
Reputation
8
Reaction score
4
Trophy points
1,288
Location
Queensland, Australia
Activity points
1,825
Can anyone recommend a DAC with SPI. 10 or 12 bit would be good.

It will be driven by a 3.3V TI CPU. Analog output would be 5V min, but up to 10V would be good.

Also, if it has an evaluation PCB option that would be a good bonus.

Thanks.
 

Try selecting Dual +/- on Digi-key. That should give you DAC's with 10V output, but they're rarer and more expensive. This excludes a few though. You should probably look through the "Analog and Digital" ones too.

On the other hand, 5V DAC's are extremely common and cheap.

Also, Analog's website has a max V+ column.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top