Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Cypress PSOC device programming.

Status
Not open for further replies.

iggypop

Newbie level 2
Joined
Jul 26, 2002
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Australia
Activity points
37
diy psoc programmer

Is anyone doing any work on implementing a 3rd party programmer for the PSOC devices ? I don't mean the commercial programmers, more low cost hobby / development stuff without having to buy the ICE etc. I'm looking at doing a design at the moment and would like to share ideas/problems.
 

dacadc

Full Member level 2
Joined
Apr 22, 2001
Messages
146
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Location
Ukraine
Activity points
1,101
an2026 cypress

I have both ICE and low-cost programmer. But I am not sure that code in internal PSoc is unprotected.
 

iggypop

Newbie level 2
Joined
Jul 26, 2002
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Australia
Activity points
37
cypress psoc programming

I assume you mean there is a Psoc in the programmer that you have ? I don't really care about doing an ICE, for the stuff I do I'm happy to debug externally and only really need to program the beasts ! Thanks for your feedback.

Iggy
 

dacadc

Full Member level 2
Joined
Apr 22, 2001
Messages
146
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Location
Ukraine
Activity points
1,101
psoc diy

1. I have dev Kit, that includes ICE, programmer, pods, samples etc. The cost is 250$

2. I have received free PSoC programmer from Cypress too, it is simple board with 9V battery, LPT port connector and an PSoC chip which controls the programming process. The programmer is quite simple, but I do not know processor Flash context.

Please describe your application; I have completed well on this processor 7 projects, so I can inform you about application feasibility study. Please contact freely with me.
 

dacadc

Full Member level 2
Joined
Apr 22, 2001
Messages
146
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Location
Ukraine
Activity points
1,101
psoc in application programming

1. I have dev Kit, that includes ICE, programmer, pods, samples etc. The cost is 250$

2. I have received free PSoC programmer from Cypress too, it is simple board with 9V battery, LPT port connector and an PSoC chip which controls the programming process. The programmer is quite simple, but I do not know processor Flash context.

Please describe your application; I have completed well on this processor 7 projects, so I can inform you about application feasibility study. Please contact freely with me.
 

BEEL1

Junior Member level 1
Joined
Dec 16, 2002
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
France
Activity points
104
diy psoc issp programmer

Everything you'll need to design a DIY-programmer is in Cypress Appnote AN2026.

I made one easily using LPT port, with a 74F125, a 74ACT04, a 4-MHz ceramic resonnator and a 7805 regulator (thus no MCU needed ! 8) )

I found that very precise clocking is not necessary (in "excute mode") so the resonnator and the NOT gate can be omitted : the clock can be bit-banged directly from the LPT port.

The only thing which doesn't seem to work with my design is securing the device (it can always be read)... as it's not a problem for me, I haven't tried to find why :D
 

Taro

Full Member level 2
Joined
Jun 28, 2001
Messages
143
Helped
8
Reputation
16
Reaction score
5
Trophy points
1,298
Activity points
1,195
diy issp programmer psoc

How about software to programme it? Are there any ready to use software for dowloading?
 

dacadc

Full Member level 2
Joined
Apr 22, 2001
Messages
146
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Location
Ukraine
Activity points
1,101
psoc board simple

Yes, I am using the PSoC for year. No problems
 

Bus Master

Full Member level 3
Joined
Dec 9, 2001
Messages
187
Helped
9
Reputation
18
Reaction score
3
Trophy points
1,298
Location
Just behind You ;-)
Activity points
1,462
how to program psoc without kit

Hi all,

I'm new to PSoC family of uC. I've downloaded the mentioned Application Notes but did not find the a sch. for a stand alone PSoC programmer (Without the ICE unit). Could you please upload nthe sch. and how to program using PSoC designer SW ?

Thanks in advance.
 

dacadc

Full Member level 2
Joined
Apr 22, 2001
Messages
146
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Location
Ukraine
Activity points
1,101
com psoc sw

Here is all which you need. But you need to program internal CPU PSOC programmer as well. If you from Ukraine, I can send the prepogrammed sample for you. The schematic is very simple.
 

bogdanm

Advanced Member level 4
Joined
Jun 24, 2003
Messages
106
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,298
Activity points
1,215
ice psoc low cost

At some point someone gave me the schematics for a PSoC programmer that uses an AT90S8515. I didn't have a chance to test the programmer myself, right now I'm working on something else, but the original author said that it succesfully programmed a range PSoC devices. Just PM me if you want to see it.
 

dacadc

Full Member level 2
Joined
Apr 22, 2001
Messages
146
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Location
Ukraine
Activity points
1,101
schematics for cypress psoc development board

have you schematic and code for AVR-based PSoC programmer?
 

bogdanm

Advanced Member level 4
Joined
Jun 24, 2003
Messages
106
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,298
Activity points
1,215
australia+psoc+evaluation+board

This is what I have, I hope you'll find it useful. Read the HTML file for more information. Again, I didn't test it in anyway, so please don't ask me why it doesn't work. Not that I'm assuming it won't work :)
 

hayder78

Member level 2
Joined
Mar 2, 2003
Messages
46
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Iraq
Activity points
384
psoc programmer diy

BEEL1 said:
Everything you'll need to design a DIY-programmer is in Cypress Appnote AN2026.

I made one easily using LPT port, with a 74F125, a 74ACT04, a 4-MHz ceramic resonnator and a 7805 regulator (thus no MCU needed ! 8) )

I found that very precise clocking is not necessary (in "excute mode") so the resonnator and the NOT gate can be omitted : the clock can be bit-banged directly from the LPT port.

The only thing which doesn't seem to work with my design is securing the device (it can always be read)... as it's not a problem for me, I haven't tried to find why :D
Can you share your schematic and software with us. It's all about time, you may kindly shorten the design time of us.
Thanx
 

Bus Master

Full Member level 3
Joined
Dec 9, 2001
Messages
187
Helped
9
Reputation
18
Reaction score
3
Trophy points
1,298
Location
Just behind You ;-)
Activity points
1,462
cypress programmer diy

Hi all,

The above mentioned PSoC Programmer is NOT WORKING :cry: :cry:
Ive tried it ...

Anybody have a good results with this programmer?


Thanks in advance.
Yours,
 

KLT

Newbie level 5
Joined
Aug 18, 2004
Messages
10
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
60
psoc diy programmer

Can you tell me which schematic is better? Which should i do?
Thanks.
 

fireplus

Full Member level 3
Joined
Oct 31, 2003
Messages
182
Helped
7
Reputation
14
Reaction score
3
Trophy points
1,298
Activity points
1,633
cypress an2026

hi,

the programmer introduced by bogdanm is working i have a friend of mine test it.

bye


Fire in the Wire :sm2:
 

bednus

Newbie level 1
Joined
Mar 20, 2005
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,288
clocks necessary for flash programming psoc

Hello

the bogdanm-s programmer is working for me OK & 8c26443
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top