Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

cy8c29466-24pxi - Need help on PSoC newbie

Status
Not open for further replies.

dhanraj_kmr

Advanced Member level 4
Joined
Sep 23, 2008
Messages
118
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,298
Location
Chennai, INDIA
Activity points
2,174
Need help on PSoC newbie

Hi to all, I am new to psoc device. I am using cy8c29466-24pxi. Even i have no time to learn all the registers and all the blocks. I have a project about driving 2 servo motors. I am using wireless communication for remote control. So i would use UART for receiving my commends. From the receiced data on UART i have to drive the motors left,right, forward and reverse. when i receive the commends i have to generate PWM. Actually I was working on some other MC. But psoc seems i have to spend more time than what i expected. But pls understand i have to complete this project with in a week.
And another doubt is i would lik to use system level project which seems so easy than chip level. For the input level there s no UART input simulation. But there s a PWM ouput simulation. How can i use the correct simulation for this project. What are the inputs and outputs simulations are needed for my project. So for this project i need your full guidance untill i get clear all my doubts. Pls help me. Dont mind my mistakes.

Thanks in advance.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top