CST with Matlab

hi! CST and Matlab friends.
I tried to be bridge from Matlab codes to CST .
and ı achieved microstrip antenna but I didn't create ports.

LIKE THIS


ports=invoke(mws,'Port');
invoke(ports,'Reset') ;
invoke(ports,'PortNumber','1');
invoke(ports,'Label','1.port')
invoke(ports,'NumberOfModes', '1');
invoke(ports,'AdjustPolarization', 'False');
invoke(ports,'PolarizationAngle', '0');
invoke(ports,'ReferencePlaneDistance','0');
invoke(ports,'TextSize','50');
%invoke(ports,'Coordinates','Picks');
invoke(ports,'Orientation','Negative');
invoke(ports,'PortOnBound','True');
invoke(ports,'ClipPickedPortToBound','False');
invoke(ports,'Xrange','-10','-10');
invoke(ports,'Yrange','-4','4');
invoke(ports,'Zrange','0.035','2');
% invoke(ports,'XrangeAdd','0','0' );
% invoke(ports,'YrangeAdd','0','0');
% invoke(ports,'ZrangeAdd','0.035','0.5');
invoke(ports,'SingleEnded','False');
invoke(ports,'Create');



please help this topic..
yours sincerely...

Hi emre,


Port=invoke(mws,'Port');
invoke(Port, 'Reset');

%General
invoke(Port, 'Label','');
invoke(Port, 'PortNumber','1');
%invoke(Port, 'Orientation', 'Positive');
invoke(Port, 'Orientation', 'ymin');
invoke(Port, 'TextSize','50');

%Position
invoke(Port, 'Coordinates','Free'); % Free, Full, Picks
invoke(Port, 'Xrange','-Wg/2','wg/2'); %Xmin , Xmax
invoke(Port, 'Yrange','-Lg/2','Lg/2');
invoke(Port, 'Zrange','0','hs+0.66');
% invoke(Port, 'XrangeAdd','0.0','0.0');
% invoke(Port, 'YrangeAdd','0.0','0.0');
% invoke(Port, 'ZrangeAdd','0.0','0.0');
invoke(Port, 'AdjustPolarization', 'False');

%Reference Plane
invoke(Port, 'ReferencePlaneDistance', '0.0');

%Mode setting
invoke(Port, 'PortOnBound', 'False');
invoke(Port, 'ClipPickedPortToBound', 'False');
invoke(Port, 'NumberOfModes', '1');
invoke(Port, 'PolarizationAngle', '0.0');
invoke(Port, 'SingleEnded', 'False');

invoke(Port, 'Create');