antennaman86
Newbie level 2
- Joined
- Dec 30, 2009
- Messages
- 2
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- Newcastle upon Tyne, England
- Activity points
- 1,300
Dear all,
I'm designing a feeder network (Planar transmission line network) to feed antenna elements in CST Microwave studio. The frequency being used is 1.7-2.1GHz (3G). I have tried for 8 lines/wavelenght, 15 lines and 20 lines per wavelength but failed to get the results. When I start simulating the design, I'm getting following error (s):
Unable to generate MESH
mesh is too dense or calculation domain may have zero volume.
Please can anybody help me come out this problem asap!!
Thanks,
Antennaman86
I'm designing a feeder network (Planar transmission line network) to feed antenna elements in CST Microwave studio. The frequency being used is 1.7-2.1GHz (3G). I have tried for 8 lines/wavelenght, 15 lines and 20 lines per wavelength but failed to get the results. When I start simulating the design, I'm getting following error (s):
Unable to generate MESH
mesh is too dense or calculation domain may have zero volume.
Please can anybody help me come out this problem asap!!
Thanks,
Antennaman86