Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

CST simulation error for large number of mesh cells

turuk

Junior Member level 2
Joined
Aug 30, 2019
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
155
Hi,

In my antenna design, for more than 3,6 billion cells required and when i try to run the program i got this error message

"Simulation setup for 3.6 billion mesh cells requires:
- MPI simulation setup with at least 2 cluster nodes
Simulation cannot be started."

Is there any of you faced with the same problem? Even for the reduced number of cells it cannot run the program plus i dont wana use less number of cells since it affects the results.

Any advice would be really helpful

Thanks in advance
 
Last edited:

BigBoss

Advanced Member level 5
Joined
Nov 17, 2001
Messages
4,703
Helped
1,423
Reputation
2,844
Reaction score
1,289
Trophy points
1,393
Location
Turkey
Activity points
28,432
I believe you need more MPI license.. ( not sure )
 

Toggle Sidebar

Part and Inventory Search


Welcome to EDABoard.com

Sponsor

Sponsor

Design Fast


×
Top