Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

CST receiving antenna for EMF Electric field Probe

Andrew77

Member level 3
Joined
Mar 16, 2006
Messages
54
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Rome
Activity points
1,679
Hi,
I'm designing an EMF broadband antenna and I about succeed with a resistive (to overcome the natural resonance) type pcb three axial dipoles (each dipole is a very short antenna compared to the wavelength ) (I need through 700 - 4 GHz) with CST.
I'm looking a software feature which I Send an incident Plane wave (of about 1 V/M) and I simulate the rectified RF after a schottky diode placed at the input terminal of the dipole
Is it possible? thanks
Andrea
 

Attachments

  • FF.png
    FF.png
    50.2 KB · Views: 5
  • S11.png
    S11.png
    8.5 KB · Views: 5
  • EMF_Filed_Probe_V2_01.png
    EMF_Filed_Probe_V2_01.png
    25 KB · Views: 4

LaTeX Commands Quick-Menu:

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top