Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

CST Microwave studio waveguides

Status
Not open for further replies.

abifar

Junior Member level 3
Joined
Dec 17, 2002
Messages
25
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
141
cst microwave studio getting started manual

Hello every body
I have a CST MS V4.2 but after Installing it dosnt have Manual or getting started PDF documents .
anybody knows where can I find a manual or documents about it ?

thanx

Babak
 

cst ms studio

abifar said:
Hello every body
I have a CST MS V4.2 but after Installing it dosnt have Manual or getting started PDF documents .
anybody knows where can I find a manual or documents about it ?

thanx

Babak

Hi!
This issue was discussed on forum at the past.
The reason is that you have 4.2 service pack only.
Documents and examples are present at full MWS 4.0 installation CD.
BTW version 5 (+5.01 service pack) is out.

Best regards
eirp
 

microwave studio video card performance

Hi

I can not install CST MWStudio 5
XP + sp, BARTON 3000,1 GB DDR
I can install CST MWStudio 5
XP+sp, Intel 4 1800, 512 mb. DDR
In what a problem ?

Help me, please

Thank you
 

cst microwave studio video

Vasily said:
Hi

I can not install CST MWStudio 5
XP + sp, BARTON 3000,1 GB DDR
I can install CST MWStudio 5
XP+sp, Intel 4 1800, 512 mb. DDR
In what a problem ?

Help me, please

Thank you

Strange..
XP SP1, Barton 2800, 1GB DDR
XP SP1, P4 2.66GHz, 2GB DDR

all OK with MWS 5.0 and 5.01

Have you 100% OpenGL compatible video card?

rgz

eirp
 

cst microwave recommended video cards

Dear eirp
OK thanx for ýour reply but do you know where can I find a manuak or Getting started doc for it . or can you upload your PDF manual of V4.2 or V5

thanx
 

Re: CST Microwave studio

abifar said:
Hello every body
I have a CST MS V4.2 but after Installing it dosnt have Manual or getting started PDF documents .
anybody knows where can I find a manual or documents about it ?

thanx

Babak

Hi Abifar,

You can find the cst manuals for version 4 on the MCU server
which is also as follows:
/ftp://212.47.22.28/EDA/CST_MWS4_manual/CST-docs.part1.rar

Regards,
MoonShine
 

Re: CST Microwave studio

abifar said:
Dear eirp
OK thanx for ýour reply but do you know where can I find a manuak or Getting started doc for it . or can you upload your PDF manual of V4.2 or V5
thanx

You can find it on the electroda:
 

Re: CST Microwave studio

borich_03,
It is not complete. One part is missing
 

Re: CST Microwave studio

I have!I upload it!!!
 

Re: CST Microwave studio

the last!!!


Upload as in the previous post.
Cluricaun
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top