Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

CST mesh problem with small gaps in structures

Status
Not open for further replies.

liux2355

Newbie level 3
Newbie level 3
Joined
Sep 3, 2013
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
21
Currently I am simulating a structure with very small gaps in it. Do I need to set the mesh to cover all the small gaps in my structure? If the mesh cell is larger than the gaps in my structure, can I get the correct result? (The thing is I expect current flows through the gaps to make a continuous current flow in the structure and big mesh cell gives me a good result as I expected, but when I make dense mesh to cover the gaps, I can not get the good result. Is that because in reality, my guess about the current flow through the small gap is impossible?)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top