Jan 16, 2018 #1 G goroks Junior Member level 1 Joined Nov 13, 2017 Messages 15 Helped 0 Reputation 0 Reaction score 0 Trophy points 1 Activity points 105 Hello! I work on an Antenna design with CST Microwave Studio. The Antenna has 6 ports that have to be combined 2 by 2. Port 5 and 6 have a phase sift of 180. 1 and 2 quadrature sift. Same for 3 and 4. I tried to used The block diagram on CST to add the couplers but can't get the s-parameters. I am not sure that connecting the couplers this way will work. Could anybody help me out? Thanks ^^
Hello! I work on an Antenna design with CST Microwave Studio. The Antenna has 6 ports that have to be combined 2 by 2. Port 5 and 6 have a phase sift of 180. 1 and 2 quadrature sift. Same for 3 and 4. I tried to used The block diagram on CST to add the couplers but can't get the s-parameters. I am not sure that connecting the couplers this way will work. Could anybody help me out? Thanks ^^