Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

crosstalk in common clock path

Status
Not open for further replies.

edagops

Junior Member level 2
Joined
May 4, 2008
Messages
22
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
India
Activity points
1,416
Hi,
When the crosstalk (delta delay)occurs in the common clock path of launch and capture flop?
What will be the impact in timing ? i.e setup or hold violation or no violation ?


Tnx.
Gops
 

Hi,

No New setup or Hold violation should occur. If path is timing clean.

Regards,
Esh..
 

Hi eshwartt,

I'm not able to understand properly.. Can u elaborate plz...

Thanx in adv,
Nantha
 

Hi Nantha,

When a crosstalk delta delay adds up on common clock path of launch and capture flops....clock path at capture end gets delayed by same amount as launch path. So, it will not create any new violation.

Regards,
Eshwar.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top