Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Creating a USB pass trough device with a Stellaris Launchpad

Status
Not open for further replies.

huub8

Junior Member level 3
Junior Member level 3
Joined
Jul 9, 2012
Messages
29
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,489
I would like to attempt to create something like the XIM3 but with just a stellaris.

For those who don't know what the XIM3 is: it is bassically a device that sits between your xbox controller en the xbox 360, letting the security signals pass trough freely whilst altering the other data signals (input signals).

I have attempted to find out how the usb protocol works, and I'm starting undstand small parts of it now. I know that the stellaris launchpad doesn't have the needed hardware to function as a usb host, but I figured that this could be solved with the aid of an extra usb host chip.

A'm I right to think that this could work?

Also, do you guys think that this is doable (I have a lot of experience with electronics, but not so much with usb).


More information on the subject:
A guy who has done a similar thing but with the use of a laptop in between
The XIM3
The stellaris launchpad site

Thank you for your time!
 

New Tiva LaunchPad can also work as USB host (spmu296 Tiva™ C Series TM4C123G LaunchPad Evaluation Board User's Guide) ...
USB micro-A and micro-B connector for USB device, host, and on-the-go (OTG) connectivity
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top