beetro78
Member level 3
- Joined
- Jan 17, 2007
- Messages
- 59
- Helped
- 3
- Reputation
- 6
- Reaction score
- 0
- Trophy points
- 1,286
- Location
- Naples, Italy
- Activity points
- 1,774
cps simulation
Hi all,
I'm triing to simulate CPS structure on anisotropic substrate with HFSS.
I used WAVEPORTS to excitate my circuit. But I do not think that my results are correct and I have some doubts. Attached there is my HFSS model.
Does anybody can help me in understanding if:
1) Is it necessary to use a vacuum box that contains my substrate with the transmission line? If so, what dimensions it should have?
2) Are the dimensions of Excitation port correct? I used a tutorial to dimension them, but the field does not seem to be correct.
Please help me.
Thank you.
Bye,
P.
Hi all,
I'm triing to simulate CPS structure on anisotropic substrate with HFSS.
I used WAVEPORTS to excitate my circuit. But I do not think that my results are correct and I have some doubts. Attached there is my HFSS model.
Does anybody can help me in understanding if:
1) Is it necessary to use a vacuum box that contains my substrate with the transmission line? If so, what dimensions it should have?
2) Are the dimensions of Excitation port correct? I used a tutorial to dimension them, but the field does not seem to be correct.
Please help me.
Thank you.
Bye,
P.