Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] coupling electronic circuits

Status
Not open for further replies.

jeffrey samuel

Advanced Member level 4
Joined
Jul 23, 2012
Messages
1,092
Helped
107
Reputation
214
Reaction score
107
Trophy points
1,363
Location
chennai,india
Activity points
6,373
hi


can any one tell me which of the 2 method is best suited for coupling

capacitive coupling or inductive coupling

pls state why as well
 

You must give technical specifications for us others to understand your particular problem. Capacitive coupling is used most but it has a cutoff frequency at the low end. Inductive coupling or transformers also has limitations.
 
For Oscillator capactor coupling is best.

- - - Updated - - -

For Oscillator capactor coupling is best.
 
its simple in my project i used a touch plate as a switch

it varies the op of an oscillator both the circuits of touch switch and that of oscillator are ready but the effective method to couple both the circuits are still a puzzle for me
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top