Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

could some 1 do a justice to this question

Status
Not open for further replies.
Y

yanda

Junior Member level 1
Joined
Nov 8, 2012
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,425
please what is pull-up and pull-down resistors and what exactly is there function in a circuit
 

Generally, they are used to pull an input to a known state when there is no driving signal.

But they do have other uses.
 
  • Like
Reactions: yanda

    Y

    yanda

    Points: 2
    Helpful Answer Positive Rating
pull up means resistor from output point to +ve, pulldown means resistor from output point to -ve .The condition when no output is awailable at the output point , your pulledup+ or pulldown - will prevail
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top