Converting Hexadecimal to ASCII - Whats the logic?

Status
Not open for further replies.
P

purifier

Full Member level 4
Joined
Nov 30, 2004
Messages
220
Helped
9
Reputation
18
Reaction score
8
Trophy points
1,298
Activity points
2,570
Can someone tell me the logic of converting a hexadecimal format to ASCII format in Assembly please?
 

Hi purifier,
Thought I might have something local, but couldn't find it. You didn't say which processor you are using, and that makes a difference with assembly. However, I do have some links which will probably help:
for PIC micro:**broken link removed**

Found at:http://forums.semiconductors.com/forums/viewtopic.php?t=687&sid=0c53db7bab463131a36e03470fb8b937

And another for the 51 is halfway down this page on Myke Predco's site - #3:
http://www.myke.com/51-snip.htm

A discussion on the conversion which may be useful:
**broken link removed**

And a discussion on this board can be found here:



I hope this is of some help to you, but if you have questions, just ask.
Regards,
Robert
 

    P

    purifier

    Points: 2
    Helpful Answer Positive Rating
Wow...Thank you so much... I'm using the logic for an 8086 processor...Will get back to you if i have any doubts...thank you..
 

"Convert HEX to ASCII - ASM/8086"
**broken link removed**

Regards,
IanP
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…