Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

contact resistance vs Vgs formulation

Status
Not open for further replies.

electronicman26

Full Member level 2
Joined
Dec 15, 2011
Messages
120
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
2,054
hello
I want to draw contact resistance variation against the Vgs voltage of Organic fet, but I don't know the equation that I can use to plot
 

cant anyone help me or reference me to a paper or link?
 

To me this seems like a malformed question.

A FET of any sort has contact resistances in series with
the channel conductance (resistance). Contact resistance
itself ought not respond to gate voltage, it is remote from
the gate and not under its influence. Channel "hookup" to
source, that's another and important deal but is not about
the resistance of a contact feature - has to do with the
engineered spacer and whether it stands off the source
side-diffusion too far, requiring extra channel bias to extend
the channel laterally until it connects to the heavily doped
access region.

This latter, you can see as a Rds(on) at low Vds nonlinearity
as you pass through zero. A well formed MOSFET will look
linear through the origin, a poorly connected one will have
a high Rds(on) below (say) 100mV Vds, which can be
distinguished from the /0 singularity by its breadth-of-region
and curvedness.

It would probablt take specialized structures to separate the
contact, access and channel resistancr contributions - PCM
structures probably have contact and channel, leaving the
access resistance as a de-embed problem?
 

I think the key to understand the background of this questions is this - "organic FET".

It looks like organic FETs have quite different physics than standard Si MOSFETs - see for example this paper:

https://scitation.aip.org/content/aip/journal/apl/97/26/10.1063/1.3533020

In particular, contacts in organic FETs are not Ohmic, and their properties depend on channel condition (applied voltages, etc.).
 
I think the key to understand the background of this questions is this - "organic FET".

It looks like organic FETs have quite different physics than standard Si MOSFETs - see for example this paper:

https://scitation.aip.org/content/aip/journal/apl/97/26/10.1063/1.3533020

In particular, contacts in organic FETs are not Ohmic, and their properties depend on channel condition (applied voltages, etc.).
yes, I see this paper and other papers like this, but the papers just present the variation of contact resistance vs gate-source voltage in Fig and dont present any equation, Is it possible for me to have a math equation between Rc and Vgs ??
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top