Constructing PCI card - request for resources

[mikasi]

Did any of you tried to build a PCI computer card for him self ? If so, share some experiance with us. Any good links out there ?

If you are interested in buildin an ISA card, can give you a link.

 

[electro]

i am interested in both isa and pci..
please send the isa link..

thanks

 

[proton]

I had experience with the AMCC 5933 demo
board. It is very easy to use and learn, and
when tou are ready you can simply use
a 5933 controller, plus some minor chips, as
pci interface.
I should have an old Borland C library to
use with amcc board. Let me know if you need it.
proton

 

[magnet]

On 2001-06-13 21:50, Bulletproof wrote:
Did any of you tried to build a PCI computer card for him self ? If so, share some experiance with us. Any good links out there ?

If you are interested in buildin an ISA card, can give you a link.

i am interested in both isa and pci..
please send the isa link..


me too

zhangjd@ssrc.ac.cn

 

[mingming]

Does anyone has experience on designing PCI-to-PCI bridge IC using FPGA or CPLD? Can you share the experience?

 

[mikasi]

The link to page describing how to make ISA card is:

https://www.boondog.com/

Have fun! :smile:

 

[turttle]

Has anybody B o r l a n d C 4.5 or alike to compile DOS apps with 32bits registers access? I need it to access PCI BIOS without WIN9x interferences, specially with sources from AMCC.

TNX

 

[Hollaender]

I build an "external" PCI to PC/104 Bridge using PLX9050 chip from PLXtech.
You can find a lot of informations on their website. Anyway, I've got their devellopment package so if you need anything just tell me

Hollaender

 

[curganer]

hi,

i ve buildt a pci- card with PLX 9050,too.
If you want develop a master card you must take the PLX 9054 or the 9080.
The V3 cubed are a new and powerful family, too.

if you want more info. post it !!!

Bye

curgan

 

[curganer]

sorry,

i forget to say, that amcc is sinking down and can't concurrent with the plx chips.
I know it.

by

 

[jerins]

Constructing PCI card

can anyone help to generate read chip select read and write signal fro plx 9054 in c mode