I had experience with the AMCC 5933 demo
board. It is very easy to use and learn, and
when tou are ready you can simply use
a 5933 controller, plus some minor chips, as
pci interface.
I should have an old Borland C library to
use with amcc board. Let me know if you need it.
proton
On 2001-06-13 21:50, Bulletproof wrote:
Did any of you tried to build a PCI computer card for him self ? If so, share some experiance with us. Any good links out there ?
If you are interested in buildin an ISA card, can give you a link.
Has anybody B o r l a n d C 4.5 or alike to compile DOS apps with 32bits registers access? I need it to access PCI BIOS without WIN9x interferences, specially with sources from AMCC.
I build an "external" PCI to PC/104 Bridge using PLX9050 chip from PLXtech.
You can find a lot of informations on their website. Anyway, I've got their devellopment package so if you need anything just tell me
i ve buildt a pci- card with PLX 9050,too.
If you want develop a master card you must take the PLX 9054 or the 9080.
The V3 cubed are a new and powerful family, too.