Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Connection to siemens simatic S5 and S7

Status
Not open for further replies.
O

oigres

Junior Member level 3
Joined
Jan 20, 2003
Messages
25
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
161
siemens simatic s5

hi, is it possible to connect to simatic S5 and S7 Plcs with a microcontroller (PIC, 8051 etc) through MPI bus (or other bus)??
(not using OPC server or other comercial software)

i just want to have access to some variables of the program (production count, etc)
could someone please help me?
 

faq simatic s5

Through MPI Bus it will be difficult.
In the simplest way you can prepare such a data exchange in RS232 ASCII mode but
you must have RS communication processor in your PLC.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top